Conservation Of Heritage Buildings Research Articles

Isolation and identification of fungal biodeteriogens from the wall of a cultural heritage church and potential applicability of antifungal proteins in protection

Fungi are able to permanently damage cultural heritage buildings and stone monuments. Protection against these biodeteriogen fungi is challenging because it may require the use of drastic techniques to remove fungal colonies and chemicals, which can cause further damage, especially on mural paintings. Natural biocides are less damaging, greener, and safer and mainly include essential oils and plant-derived substances. Studies on the applicability of purified antifungal proteins in the conservation of cultural heritage buildings are lacking. In this study, we isolated mold mycoflora from the biodeteriorated inner walls of the Calvinist church of Kézdialbis (Kézdialbis, Romania) and investigated the in vitro antifungal efficacy of Neosartorya (Aspergillus) fischeri antifungal proteins, NFAP and NFAP2 against them. Antifungal susceptibility testing revealed that these proteins inhibited the growth of the most commonly isolated indoor biodeteriogen fungi from the site (Aspergillus creber, Aureobasidium pullulans, Cladosporium sp., Penicillium chrysogenum, and Parengyodontium album) and not common ones (Mucor hiemalis, Sarocladium kiliense) with different spectra and efficacies. A phytopathogen and an entomopathogen species (Pseudopithomyces chartarum and Beauveria pseudobassiana, respectively) were also isolated and described first as fungal biodeteriogens of the inner walls. Among them, P. chartarum was susceptible to NFAP2. Next, we tested the applicability of NFAP and NFAP2 in protecting cultural heritage buildings in a wall model experiment against A. creber. Topical application of both antifungal proteins significantly decreased the area infected by fungi. Scanning electron microscopy of the wall models showed that A. creber had reduced growth and conidiation in the presence of NFAP and NFAP2. This inhibitory activity was maintained for a long time. Strong UV irradiation decreased the protective effect of both proteins in the wall model. Taking into account these results, the high stability of NFAP and NFAP2 in harsh environments, and their bulk recombinant producibility, we suggest that both can be used in the protection and posttreatment of painted walls of cultural heritage buildings to clean up mural painting or to inhibit mold recolonization after mechanical, physical, or chemical decontamination.

Analysis of the Current Status of Sensors and HBIM Integration: A Review Based on Bibliometric Analysis

This article presents a bibliometric analysis conducted on the implementation of sensor-extracted data in the context of Historical Building Information Modeling (HBIM) with a focus on the conservation of heritage buildings. The study utilized recognized databases, namely, Web of Science (WoS) and Scopus. A bibliometric analysis methodology was applied, employing the VOSviewer 1.6.19 software. The results obtained provide a robust overview of the current state and trends in HBIM and sensor research and enabled the identification of emerging trends in the field of preventive conservation. Three promising trends were identified, establishing connections between this field and 4D spatial data management, energy performance, and artificial intelligence. Additionally, relations with climate change were also detected. These trends underscore a significant convergence of technologies and methodologies in the realm of heritage building conservation. The conclusions serve as a valuable contribution to guiding future research in the field of built heritage conservation.

The critical issues in the conservation of Heritage building: Masjid Mahabat Khan Peshawar, Pakistan

The critical issues in the conservation of Heritage building: Masjid Mahabat Khan Peshawar, Pakistan

Single drone-based 3D reconstruction approach to improve public engagement in conservation of heritage buildings: A case of Hakka Tulou

Public engagement in protecting architectural heritage is a critical component of sustainable development. This study has developed an innovative single drone-based 3D reconstruction (SD-3DR) approach for public-involved architectural heritage conservation. A new software tool named after CU-Recon is also developed to enable easy access and efficient 3D reconstruction using drone photography. Unlike traditional photogrammetry-based reconstruction, CU-Recon adopts our unique deep learning-based multi-view stereo network named LCM-MVSNet, enabling the public to employ only one drone for image capture and 3D reconstruction. LCM-MVSNet applies a learnable cost metric (LCM) to adaptively aggregate multi-view matching similarity into the 3D cost volume by leveraging sparse point hints. Its outstanding reconstruction performance for building scale applications is proved by the extensive experiments on the DTU training dataset and BlendedMVS dataset. A remarkable architectural heritage Hakka Tulou is selected to verify the effectiveness of the SD-3DR on large-scale heritage buildings. The results show our approach outperformed the other four 3D reconstruction tools. Moreover, the reconstruction quality in CU-Recon is evaluated from a perspective of heritage conservation using the concept of satisfaction. Practitioners expressed an overall satisfaction score of 4.175 (out of 5) for the reconstruction quality of the method. Survey results reveal a higher level of satisfaction with single drone photography for architectural heritage conservation compared to LiDAR-based scanning in terms of portability, operability, and cost. The research outcome changes the current situation of government-led top-down architectural heritage conservation by providing valuable insights for individual practitioners in creating bottom-up heritage conservation routes.

Historic Building Information Modeling for Conservation and Maintenance: San Niccolo’s Tower Gate, Florence

In the field of conservation and protection of heritage buildings, knowledge plays a fundamental role, emphasized by national and international rules and regulations. This aspect becomes fundamental when conducting the structural assessment of a historical building. This study envisaged a cognitive phase via the application of advanced survey and diagnostic methodologies to define the materials, construction techniques, and state of conservation of the structural system of a specific building forming part of Florence’s heritage. The information complex produced formed the basis for the structural assessment and for the experimentation of the BIM methodology within the creation of databases for the management of cognitive processes of historical buildings. The case study is one of the gates of the last circle of walls of the 14th century and is the only one that has maintained its original height, despite modifications: the gate/tower of San Niccolò. The research conducted, in addition to achieving a structural assessment of the tower, has allowed the creation of a dynamic model for organizing and consulting the information, laying the groundwork for the creation of a conservation and maintenance plan.

A robust superhydrophobic coating of siloxane resin and hydrophobic calcium carbonate nanoparticles for limestone protection

Hydrophobic calcium carbonate (CaCO3) nanoparticles (NPs), modified with dodecanoic acid (DA), are produced and dispersed in solutions of KSE 100, which is a silicic acid ester base product used for the conservation and maintenance of heritage and modern buildings. The dispersions are sprayed on limestone and marble specimens. By adjusting the relative concentrations of DA and NPs, the treated stones obtain superhydrophobic properties. Focusing on limestone it is reported that the treatment has negligible effects on the colour and vapour permeability of the original stone and offers protection against water capillary rise. Several studies are performed to test the durability of the composite (KSE + CaCO3-DA NPs) coating against rain impact, freezing and thawing, salt attack and UV radiation. Moreover, the mechanical, chemical and thermal durability of the coating is studied according to the tape peeling test, contact angles of drops which correspond to a vast range of pH, and heat treatment. The results of the aforementioned tests reveal the very good stability of the composite coating. In sum, it is reported that the wetting properties of the KSE 100 stone strengthener, which is used in building conservation, can be highly improved by adding a small amount of modified CaCO3 NPs. The latter are chemically compatible with calcareous stones.

Heritage buildings management: the role of situational awareness and cyber-physical systems

AbstractSafeguarding and conservation of cultural heritage is an important issue that requires both theoretical knowledge and practical implementation to effectively protect this valuable asset. In recent years, new technologies have enabled the development of advanced monitoring and control systems that can provide more precise and timely information about the condition of heritage buildings. Additionally, these systems can collect and analyze a large amount of data, allowing decision-makers to make informed decisions regarding maintenance and other management processes. With a situational awareness model proposed for heritage building conservation as a starting point, this work outlines how the design and implementation of a cyber-physical system to support conservation processes can be done. The model combines decisional processes that involve both humans and automated systems and can be used as a guideline for the realization of decision support systems for the management of heritage buildings. The paper provides a case study describing the steps for the realization of a cyber-physical system for automated monitoring and control at the Royal Palace of Carditello, a prominent cultural attraction in Italy.

Inhibitory effect of UV and gamma radiation for fungal biodeterioration of concrete: A short-term study for sustainable conservation

The conservation of concrete-based deteriorated heritage buildings is a big challenging issue worldwide including in India. This study focused on to prevent fungal biodeterioration in concrete using UVC and gamma radiation. M20 graded concrete cubes (5 cm × 5 cm × 5 cm) were infected with Aspergillus tamarii, which was isolated from a 200 years old historic heritage building. M20 signifies a mixture of cement, sand and aggregate (1:1.5:3), made in such a way that the concrete cube has a compressive strength of 20 N/mm2 when examined after 28 days of curing. The fungal growth appeared clearly as calcium oxalate crystals in the Scanning Electron Microscope (SEM) photographs. Several doses of UVC and gamma radiation were applied on concrete cube. The changes in concrete properties were examined after 30 days in terms of weight, compressive strength, Fourier Transform Infrared Spectroscopy (FTIR) and micro Energy Dispersive X-ray Fluorescence (EDXRF). The results exhibited that compressive strength of control (non-infected and non-irradiated), biodeteriorated (infected), UVC (625 µw/cm² × 300 s) and gamma (0.5 KGy) irradiated infected (inhibition) concrete cubes were 19.74 ± 0.46, 18.88 ± 0.43, 20.20 ± 0.34 and 19.93 ± 0.20 N/mm2 respectively whereas negligible weight losses were observed for inhibition cubes compared to biodeteriorated ones. Calcite (1400, 874 and 705 cm−1), one of the major functional band present in concrete became weak after getting infected by Aspergillus tamarii and strong for inhibition samples irradiated with the above doses. The EDXRF analysis exhibited that mass percentage of calcium ions of the biodeteriorated concrete cubes (49.88 ± 0.65%) was lower than that of UV (75.75 ± 0.16%) and gamma (70.95 ± 0.30%) irradiated infected or inhibition concrete cubes. Altogether, the efficacy of the recommended inhibitory dose of ultraviolet and gamma radiation against concrete deterioration in the field of conservation of heritage building was observed to be positive.

Water-related deterioration risk assessment for sustainable conservation of heritage buildings in the Forbidden City, China

A suitable hygrothermal environment is imperative for sustainably conserving movable and immovable cultural heritage. This paper proposes a combined method for quantitatively assessing water-related deterioration risks in heritage buildings, validated employing the Forbidden City in China, a UNESCO World Heritage site. The approach emphasizes combining hygrothermal coupled transfer simulation with conventional environmental monitoring for systematic risk assessments. Key findings include identifying predominant causes of year-round deteriorations of salt weathering, freeze–thaw damage, microorganism growth, and physical cracking. Secondly, it underscores the persistent dampness at the bottom, stemming from capillary rising in building foundations, rendering the present environment unsuitable for the conservation of single-story heritage buildings. Lastly, in the Forbidden City, significant deteriorations manifest just a few millimeters or centimeters beneath the surfaces of brick walls and floors. Suggested measures include reducing shallow groundwater and enhancing airtightness. This study establishes a scientific framework for deterioration risk assessment and sustainable cultural heritage conservation.

Condition Assessment of Heritage Buildings via Photogrammetry: A Scoping Review from the Perspective of Decision Makers

In recent years, advanced digital technologies have driven an outstanding paradigm shift in the field of architectural heritage, particularly for building modelling, historical documentation and touristic promotion. Nonetheless, they show great potentialities in the field of assessment and control of the state of conservation of heritage buildings. In particular, close-range and aerial photogrammetry have increasingly relied on low-cost and user-friendly tools and procedures, with a high degree of automation that makes them accessible to specialists who are foremost involved in architectural diagnosis and conservation, rather than in remote sensing sciences. In this framework, this paper provides a scoping review of 117 publications, based on the PRISMA protocol, from Scopus and Web of Science databases, related to the employment of photogrammetric models and methods, with specific focus on the targets and purposes of the diagnostic process, including decay mapping, structural monitoring and modelling, non-destructive investigation and multi-source documentation. In detail, the results point out that current studies mainly support robust processing of large amounts of information from direct observation of surface alterations, systematic correlation between materials, construction characteristics, visible anomalies and experimental measurements, as well as multi-disciplinary collaborative workflows through remote inspection and harmonized data management. Further improvements were identified, including standardization of acquisition procedures, automatization of elaboration pipelines, integration of real-time data, validation of diagnosis decision-making support tools and scalability to networks of assets.

Implementation of a Circular Bioeconomy: Obtaining Cellulose Fibers Derived from Portuguese Vine Pruning Residues for Heritage Conservation, Oxidized with TEMPO and Ultrasonic Treatment

Inspired by the principles of the circular economy, using vineyard pruning residues as a source of raw materials for producing nanocellulose is a promising approach to transforming vineyard resources into value-added products. This study aimed to obtain and characterize cellulose and cellulose nanofibers from such sources. The cellulose collected from different fractions of micronized stems (500, 300, 150 μm, and retain) of vines was submitted to autohydrolysis and finally bleached. Soon, it underwent treatment via (2,2,6,6-tetrametil-piperidi-1-nil)oxil (TEMPO) oxidation and ultrasonic to obtain nanocellulose fibers. The cellulose films were obtained at a microscale thickness of 0.05 ± 0.00; 0.37 ± 0.03; 0.06 ± 0.01 e 0.030 ± 0.01 mm, with the following particle size: 500 µm, 300 µm, 150 µm, and retain (<150 µm). The bleaching efficiency of the cellulose fibers of each particle size fraction was evaluated for color through a colorimeter. In addition, the extraction of cellulose fibers was assessed by infrared with Fourier transform, and size and shape were assessed by microscopy. Differential scanning calorimetry and X-ray diffraction were performed to confirm the thermal and crystalline properties. Combining autohydrolysis with a bleaching step proved to be a promising and ecological alternative to obtain white fractions rich in cellulose. It was possible to perform the extraction of cellulose to obtain nanocellulose fibers from vine pruning residues for the development of coatings for the conservation of heritage buildings from environmental conditions through an environmentally friendly process.

Shaping Digital Twin Concept for Built Cultural Heritage Conservation: A Systematic Literature Review

ABSTRACT The Digital Twin (DT) technology has shown promise in transforming complex engineered systems. However, its adoption in the Architecture, Engineering, Construction, and Operation (AECO) field, particularly for Built Cultural Heritage (BCH) conservation, is still in its early stages. This study presents a systematic literature review of 85 academic publications to evaluate the current state of DT implementation in heritage building conservation and identifies areas for optimising preventive management. In addition, this review explores interpretations of the DT concept in this field, addressing overlaps with Historical/Heritage Building Information Modelling (HBIM), discusses DT functionalities and presents existing frameworks. The findings demonstrate the potential of DT to revolutionise BCH conservation through a holistic approach. However, further focus is needed on features and tools for enhancing performance-based management with targeted strategies and advanced data analysis. Future research should prioritise developing these aspects to fully leverage the potential of the DT paradigm in BCH conservation.

HBIM: A Tool for Enhancing the Diagnosis of Historical Buildings: The Case of St. George’s Memorial Anglican Church, Oshawa

The primary objective of this research is to address the research gap in the conservation of heritage buildings in Canada by integrating Historical Building Information Modeling (HBIM) as a tool. The proposed study aims to develop an enhanced framework for the preservation of historical buildings through the utilization of HBIM and 3D-scanning technology. As a result, the research aims to generate a comprehensive database comprising various families of models while also incorporating strategies for point-cloud clustering data. The significance of this research lies in its potential to contribute to the conservation and restoration process of historical buildings. Currently, there are a lack of standardized approaches and comprehensive databases for accurately documenting and reproducing historical buildings. By integrating HBIM and 3D-scanning technology, this research will enable the creation of highly accurate three-dimensional virtual models, consisting of millions of points, which will serve as a comprehensive dataset for the restoration of heritage buildings. The findings of this research will benefit multiple stakeholders. Preservation architects, conservationists, and heritage professionals will gain a valuable tool for documenting and analyzing historical buildings with a high level of precision. The comprehensive database and framework proposed in this study will facilitate decision-making processes during the restoration and preservation phases, ensuring that the original architectural elements and materials are faithfully reproduced. Additionally, policymakers and governmental organizations involved in heritage conservation can use the outcomes of this research to establish standardized guidelines and regulations for the preservation of historical buildings in Canada. Ultimately, the broader community will benefit from the enhanced preservation efforts, as it will contribute to the cultural and historical identity of the nation, fostering a sense of pride and connection to the past.

Strategy for HBIM implementation using high-resolution 3D architectural documentation based on laser scanning and photogrammetry of the José de Alencar theatre

Cultural heritage (CH) relevant importance to society leads to the need for historical, architectural, historical, and structural documentation. Such documents are necessary for the effective conservation and restoration of heritage buildings. Digitalization and documentation have been challenging and multidisciplinary topics for cultural heritage (CH) involving new technologies for information capture. 3D architectural documentation of existing heritage buildings is possible due to digital survey technologies joined with BIM methodology. The José de Alencar Theatre was surveyed with an integrated approach using a laser scanner and photogrammetry. BIM methodology based on digital scanning and image-based data was applied to generate a 3D model and extensive BIM library. The results indicate that a reliable BIM model of the José de Alencar theatre can be done, generating useful documentation and information on the historical construction based on the laser scanner and photogrammetry data with architectural geometry well-detailed.

TRANSFORMASI DIGITAL PERAN AI DALAM KONSERVASI DAN RESTORASI BANGUNAN HERITAGE

The conservation and restoration of heritage buildings represent crucial challenges in preserving human cultural and historical wealth. In the current era of digital transformation, artificial intelligence (AI) has emerged as an innovative tool playing a pivotal role in supporting efforts to conserve and restore historical buildings. This paper explores the fundamental role of AI in the digital transformation of heritage building preservation. We review various AI technologies used in this context, such as sensor-based structural monitoring, pattern recognition for damage identification, and the utilization of 3D modeling algorithms for virtual restoration. Furthermore, we discuss the positive impact of AI in digitizing historical data and creating realistic simulations that facilitate better conservation decision-making. The research aims to examine the role of AI in heritage building conservation and restoration. The research methodology employs qualitative and literature review studies

Wadudia School and Swat Museum: Lost Heritage of Swat

In the last decade, two significant buildings of the swat state’s era were deteriorated and damaged due to natural and man-made disasters, the wadudia school and swat museum. This paper aims to document, analyze and compare these events and subsequent reconstruction of these buildings. Conservation and preservation of built heritage is the collective responsibility of the state and citizens, due to its role as a valuable resource for present and future generations. Heritage buildings not only contain the material evidence of their time but carry itself the long history. This research used a case study as the primary research method combined with a descriptive research method. This study emphasizes the basic consideration for the protection and conservation of numerous heritage sites and buildings of the swat region. This is high time to consider built heritage as assets and resources, for their long-listed benefits including economic educational, and cultural tourism.

Investigating the material properties of hemp fiber and puffed rice for use in heritage conservation

A nation’s customs and traditions are unique, including the appearance of its buildings. Restoring older buildings retains cultural connections and enhances sensitivity to the past. Conservation process materials must be distinguishable from originals for easy removal or change while matching features, a challenging task. The goal is to adopt materials similar in texture, scale, color, and form to the original. The increasing need for a sustainable environment attracts the scientific community towards alternative natural materials instead of traditional ones, adopting ecological principles. Eco-friendly materials from agricultural waste are less polluting. Bio-based materials, like hemp and rice, offer good thermal properties and replace traditional materials. Some are commercialized, while others are in the early production stages. Application conditions and potential adoption in heritage building conservation still need to be studied. Gaps in existing knowledge are addressed by assessing biomaterials’ physical properties in various conservation scenarios. Comparative analysis between new and conventional materials identifies vital advantages. The analysis also determines characteristics like thermal resistance, fire resistance, color, texture, environmental and health impact, and the production process. Findings indicate outstanding performance and can be developed in various colors and textures, essential for preserving the original structural appearance.

The Component of Historical Study Influencing Heritage Building Conservation Decision: A Literature Review

The Component of Historical Study Influencing Heritage Building Conservation Decision: A Literature Review

The Impact of Nanoparticles Implementation on Conservation of Heritage Buildings (Overview the Nanocathedral Project)

The Impact of Nanoparticles Implementation on Conservation of Heritage Buildings (Overview the Nanocathedral Project)

Data-Driven Multi-Scale Study of Historic Urban Environments by Accessing Earth Observation and Non-Destructive Testing Information via an HBIM-Supported Platform

ABSTRACT Digital analytical tools combined with 3D documentation are used incrementally in building rehabilitation in the conservation state analysis process. In the last decade, due to the current advancements in the Architecture Engineering Construction (AEC) industry, the application of BIM methods in heritage building conservation started becoming more attractive for specialists and practitioners. In light of the latest concepts in data management at city level, as a result of the discussion about smart city representations, the use of a shared digital environment that caters to technical studies related to conservation analysis, building provenance, structural changes, and urban context transformations can lead to reduced time, improved quality, and lowered cost of city management for all domain experts and city stakeholders. This paper explores the benefits of multi-scale and discipline digitization for the restoration of heritage buildings, highlighting the potential impact of innovative data integration, methods, and workflows on architectural renovation and energy upgrades. Specifically, it focuses on the integration of conservation information for heritage buildings and large-scale environmental analysis data for historic clusters in modern cities.